Paint for wall



Quality one-component water-based paint intended for direct application on wall ceramic tiles in kitchens, bathrooms and toilets. It is adapted for interior use. It is suitable for damp areas. Avoid standing water. Substrate on which it can be applied: ceramic wall tiles and porcelain ceramics.

  • Water-based, with a weak odor
  • It is applied directly to the tiles – no primer or surface sanding is necessary
  • Excellent coverage
  • 3 in 1 system: sealing, base and final color in one
  • Color: white
  • Gloss level: semi-gloss

Preparation of the substrate

The tiles must be clean, dry, free of dust and grease. Remove limescale residues with a limescale remover and then rinse the surface well. Remove the remains of silicone. Joints must be stable and solid. Close all possible cracks beforehand.

Conditions of application

During the entire period of application and drying of the material, the substrate temperature and the air temperature must be between 8°C and 30°C, and the relative air humidity between 30% and 75%. Excessive air humidity, low temperature, excessive film thickness and lack of air movement can slow down the drying of the paint film.


In 2 to 3 layers with a quality short-pile roller or low-pressure airless paint applicator (such as the Wagner Felxio series). When the paint is applied with a device, one application is sufficient. For tiles in the shower area, 3 coats are definitely recommended.

Packaging750 ml


8 – 10 m² / L.

Cleaning tools

Immediately after use with plenty of soap and water.


Dry to dust after about 30 minutes, dry to the touch in about 60 minutes, applying the second layer is possible after about 4 hours, and complete drying is achieved after 5 days.


Use the usual mild home cleaners. Do not use abrasives. Storage: Store in a cool and dry place in an original and well-sealed package. Protect from freezing.